printing and logging DO Meter

HI 91410 Printing and Logging Dissolved Oxygen Meter * Logging Capability Up to 16,000 readings can be stored in the datalogger's memory for retrieval at a later date. * Documented Monitoring Ideal for constant monitoring of O2 levels. It prints date, time, sample #, mg/l O2 & ?C. * RS232 Computer Interface The HI 9200 infrared data transmitter (optional) will send the information into a standard PC in seconds * Special Features Altitude and salinity factors are automatically compensated for. * Order Information * Specifications HI 91410 combines all of the comprehensive printing functions of the HI 9141 and adds the capability to log readings. In addition to supplying the user with instant print-outs of the D.O. reading and lot number, HI 91410 also provides datalogging facilities that will store up to 16,000 readings. These readings can be scrolled through at any time, printed or even transferred to a computer system for elaboration or permanent storage. An optional HI 9200 infrared transmitter can be used to take the data from the HI 91410 and send it into a computer without any cords between them. Simply place the meter on the Transmitter and, at the push of a button, all of the recorded lots are transferred in seconds. This infrared connection is important in humid environments where a standard RS232 plug on a meter could become damaged. HI 91410 comes supplied with an HI 76407/4 D.O. probe equipped with a 13' (4 m) cable, 2 spare replacement membranes, HI 7041S electrolyte solution, 5 paper rolls, 4 x 1.5V AA batteries and instruction manual in a rugged carrying case. Specifications: Range: 0.00 to 19.99 mg/L / 0.0 to 50.0?C Resolution: 0.01 mg/L / 0.1?C Accuracy: 1.5% Full Scale / ?0.5?C Calibration: Automatic in saturated air at 100% Temp. Compensation: Built-in temperature sensor on D.O. probe automatic from 32 to 86?F (0 to 30?C) Altitude Compensation: 0 to 6,230' (1,900 m) Resolution: 328' (100 meters) Salinity Compensation: 0 to 40 g/l Probe: HI 76407/4 polarographic D.O. probe Printer: Low-power impact type belt using 38mm plain paper Logging Intervals: 1,2,5,10,15,30,60,120 & 180 minutes Battery: 4 x 1.5 volt AA, Auto-off after 4 hours; up to 70 hours of use; Power socket for 12 VDC supply Environment Temp.: 32 to 122?F (0 to 50?C) Weight: 18 oz.(510 g) KIT: 3.1 lbs (1.4 Kg) Dimensions: 8.7 x 3.2 x 2.6" (220 x 82 x 66mm)